Color Bars/Audio Reference Signal
87
Color Bars/Audio Reference Signal
You can have the camcorder output and record color bars and a 1 kHz audio reference signal and
output them from the HDMI OUT terminal, AV OUT terminal, and
×
(headphone) terminal (audio
reference signal only).
Recording Color Bars
You can choose between EBU color bars and SMPTE standard-definition color bars.
1 Open the [Color Bars] menu.
[FUNC.]
>
[MENU]
>
>
[Color Bars]
2 Touch the desired option and then touch [
X
].
• The selected color bars appear on the screen and will be recorded when you press
Y
.
Recording an Audio Reference Signal
The camcorder can output a 1 kHz audio reference signal with the color bars.
1 Open the [1 kHz Tone] submenu.
[FUNC.]
>
[MENU]
>
>
[1 kHz Tone]
2 Select the desired level and then touch [
X
].
• Available levels are -12 dB, -18 dB and -20 dB.
• Select [
j
Off] to turn off the signal.
• The signal is output at the selected level and will be recorded when you press
Y
.
Operating modes:
