![background image](http://html1.mh-extra.com/html/canon/legria-hf-r16/legria-hf-r16_instruction-manual_4189924140.webp)
140
Additional Information
Recording
Pre
ss
ing
will not
s
tart recording.
- You cannot record while the camcorder is writing previous recordings onto the memory (while
the A
CC
ESS indicator is on or flashing). Wait until the camcorder has finished.
- The memory is full or it already contains the maximum number of scenes (3,999 scenes).
Delete some recordings (
50, 83) or initialize the memory (
35) to free some space.
The point where
wa
s
pre
ss
ed doe
s
not match the beginning/end of the
recording.
- There is a slight interval between pressing
and the actual start/end of record-
ing. This is not a malfunction.
The camcorder will not foc
us
.
- Autofocus does not work on the subject. Focus manually (
58).
- The lens or Instant AF sensor is dirty.
C
lean the lens or sensor with a soft lens-cleaning cloth
(
159). Never use tissue paper to clean the lens.
When a
su
bject flit
s
acro
ss
in front of the len
s
, the image appear
s
s
lightly bent.
- This is a phenomenon typical of
C
MOS image sensors. When a subject crosses very quickly in
front of the camcorder, the image may seem slightly warped. This is not a malfunction.
Changing between recording (
)/record pa
us
e (
)/playback (
) take
s
longer than
usu
al.
- When the memory contains a large number of scenes, some operations may take longer than
usual. Save your recordings (
104) and initialize the memory (
35).
Movie
s
or photo
s
cannot be recorded properly.
- This may occur as movies and photos are recorded/deleted over time. Save your recordings
(
104) and initialize the memory (
35).
After
us
ing the camcorder for a long time, it become
s
hot.
- The camcorder may become hot after using it continuously for long periods of time; this is not
a malfunction. If the camcorder becomes unusually hot or it becomes hot after using it only
for a short while, it may indicate a problem with the camcorder.
C
onsult a
C
anon Service
C
en-
ter.
Playback
Cannot add
s
cene
s
to the playli
s
t.
- The playlist can contain a maximum of 999 scenes. If the playlist includes scenes recorded in
FXP mode, the maximum number of scenes in the playlist may be less than 999.
- You may not be able to add scenes to the playlist if they were recorded or edited using
another device.
- The memory is full. Delete some recordings (
50, 83) or initialize the memory (
35) to
free some space.
START/STOP
START/STOP
START/STOP