150
Additional Information
- Music tracks will not play back correctly if the connection was interrupted while transferring
the music files from the Camcorder Supplemental Disc. Delete the music tracks and transfer
the music files again.
- The transfer rate of the memory card used is too slow. Use a recommended memory card
(
0
Cannot divide scenes
- You cannot divide scenes recorded or edited using another device.
- The memory is full. Delete some recordings (
0
54, 100) to free some space.
Cannot copy scenes/photos
- You may not be able to copy scenes/photos recorded or edited using another device.
Cannot mark individual scenes/photos in the index screen with a checkmark
O
- You cannot select more than 100 scenes/photos individually. Reduce the number of selected
scenes/photos or use the [All Scenes] or [All Photos] option.
Indicators and Onscreen Displays
lights up in red.
- Battery pack is exhausted. Replace or charge the battery pack.
appears on the screen.
- The camcorder cannot communicate with the battery pack attached so the remaining battery
time cannot be displayed.
4
/
7
lights up in red.
- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memory
card. Initialize the memory card if the display does not change back to normal.
- The memory card is full. Replace the memory card or delete some recordings (
0
to free some space on the memory card.
Even after stopping recording, the ACCESS indicator does not go off.
- The scene is being recorded in the memory. This is not a malfunction.
The red ON/OFF (CHG) indicator flashes rapidly (
one flash at 0.5-second
intervals).
- Charging has stopped because the compact power adapter or the battery pack is faulty. Con-
sult a Canon Service Center.
The red ON/OFF (CHG) indicator flashes very slowly (
one flash at 2-
second intervals).
- The temperature of the battery pack is outside the charging range. If the battery pack’s tem-
perature is below approximately 0 °C, warm it before charging it; if it is above approximately
40 °C, let the battery pack cool down before charging it.
- Charge the battery pack in temperatures between 0 °C and 40 °C.
- The battery pack is damaged. Use a different battery pack.