Photos
105
Continue from the same menu:
[Photo Capture Quality]
Desired photo quality*
* The number displayed at the bottom indicates the approximate number of photos
that can be recorded with the current quality setting.
To capture the photo(s)
1 Play back the scene containing the picture you want to capture.
2 Pause the playback at the point you want to capture.
3 Press
fully.
To capture a photo sequence, hold
pressed down.
NOTES
• The data code of the photos will reflect the date and time of recording of
the original scene.
• Photos captured from a scene with a lot of fast movement may be
blurred.
• Photos will be recorded on the memory selected for recording photos.
• [
Photo Sequence]:
- Up to 100 photos can be captured at a time.
- The photo sequence capture will stop when the end of the scene is
reached (playback will pause at the beginning of the following scene).
- Photos will be captured at intervals of 1/30 second (1/24 second, if
the scene was recorded at a frame rate of [
PF24]).
Protecting Photos
You can protect photos from accidental erasure.
Protecting Single Photos
1 In single photo view, open the photo selection screen.
[
Protect]
[
Protect] appears on the screen.
2 Select (
) the photo you want to protect.
3 Press
to protect the photo.
FUNC.
PHOTO
PHOTO
Operating modes:
FUNC.
CO
PY
