Recording Audio
83
Options
(
Default value)
Switching the Input (MIC Terminal)
You can switch the input of the MIC terminal depending on whether you are using an external
microphone or an external audio source, such as a digital audio player.
1 Open the [MIC Terminal Input] screen.
[FUNC.]
>
[MENU]
>
p
>
[MIC Terminal Input]
2 Touch [
Þ
External Audio] or [
ß
Microphone] and then touch [
X
].
• If necessary, activate and adjust the audio mix balance (
A
84).
Low Cut Filter (MIC Terminal)
When you are recording using a microphone connected to the MIC terminal, you can activate the low
cut filter to reduce the sound of blowing wind, a car’s engine and similar ambient sounds.
1 Open the [MIC Low Cut] screen.
[FUNC.]
>
[MENU]
>
p
>
[MIC Low Cut]
2 Touch [
i
On] and then touch [
X
].
[
í
Monaural]
Mono recording that emphasizes sound coming from the front of the camcorder/
microphone.
[
h
Normal]
Standard stereo recording; a middle point between the [
î
Wide] and
[
í
Monaural] settings in reach.
[
î
Wide]
Stereo recording of ambient sound over a more extensive area that adds to the sense of
presence of movies.
[
ï
Zoom]
Stereo recording with the sound linked to the zoom position. The larger the subject
appears on the screen, the louder the sound will be.
Operating modes:
Operating modes:
COP
Y
