Additional Information
215
List of Messages for the Optional Video Light
List of Messages for Connecting to an External Hard Drive
Too many photos and MP4 movies. Disconnect the USB cable.
- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos
and MP4 movies on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS).
- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and
restore the connection after a short while.
Total play time is too long
- When converting scenes from a story, the maximum total playback time of the scenes to be
converted is 12 hours. Reduce the number of scenes to be converted to SD.
Unable to recognize the data
- You transferred data to the camcorder recorded using a video configuration that is not sup-
ported (NTSC). Play back the recordings with the device originally used to record them.
Unable to recover data
- Could not recover a corrupted file. Save your recordings (
A
144) and initialize the memory
using the [Complete Initialization] option (
A
40).
Unsupported gallery data detected. Cannot record or edit. Delete gallery data?
- The gallery data of the movies in the selected memory card is not supported. The movies can
be played back but you cannot edit them or record additional scenes to this gallery. Select
[Yes] to delete the unsupported gallery data. Note that after doing so, you will not be able to
play back the movies with the device originally used to record the unsupported gallery data.
Battery charge is low. Cannot use the accessory attached to the mini advanced shoe.
- The battery charge is too low to supply power to the accessory attached to the mini advanced
shoe. Charge the battery pack.
Cannot use the video light while powering the camcorder with the compact power adapter
- Use a fully charged battery pack instead when using the video light.
Cannot use the video light with the attached battery pack
- When using the video light, use the supplied BP-718 or optional BP-727 Battery Pack.
Error writing to external hard drive
- This message will appear the next time you turn on the camcorder if power supply was acci-
dentally interrupted while the camcorder was writing to the external hard drive. Select
[Recover] to try to recover the recordings.
COP
Y