manualshive.com logo in svg

Canon MF4500 Series, Service Manual

The Canon MF4500 Series service manual is a comprehensive guide that helps users troubleshoot and repair their Canon MF4500 printer. Get this manual free of charge and easily downloadable from our website. Ensure seamless performance and maximize the longevity of your product with this user-friendly guide. (Note: Specify your website URL)

Share
Download
background image

Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/
MF4410/MF4412) -----------------------------------------------------------------4-37
Removing the Rear Cover 
Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/
MF4410/MF4412) -----------------------------------------------------------------4-37

Document Exposure/Feeder System ---------------------------------- 4-39

Location of DADF Unit and Reader Unit 
(MF4580dn/D550) ----------------------------------------------------------------4-39
Location of SADF Unit and Reader Unit 
(MF4570dn/MF4550d/MF4553d/MF4554d/MF4450/MF4452/MF4453/
MF4430) -----------------------------------------------------------------------------4-39
Location of Copyboard Cover and Reader Unit 
(MF4420n/MF4410/MF4412/D520) ------------------------------------------4-40
Before Removing the DADF Unit and Reader Unit-----------------------4-40
Removing the DADF Unit and Reader Unit --------------------------------4-40
Before Removing the DADF Unit ---------------------------------------------4-42
Removing the DADF Unit -------------------------------------------------------4-42
Before Removing the DADF Pickup Unit -----------------------------------4-44
Removing the DADF Pickup Unit ---------------------------------------------4-44
Before Removing the DADF Motor Unit -------------------------------------4-48
Removing the DADF Motor Unit ----------------------------------------------4-48
Before Removing the DADF Solenoid Unit ---------------------------------4-49
Removing the DADF Solenoid Unit ------------------------------------------4-49
Removing the DADF Pickup Roller Unit ------------------------------------4-50
Removing the DADF Separation Pad ----------------------------------------4-52
Before Removing the SADF Unit and Reader Unit -----------------------4-53
Removing the SADF Unit and Reader Unit --------------------------------4-53
Before Removing the SADF Unit ---------------------------------------------4-55
Removing the SADF Unit -------------------------------------------------------4-55
Before Removing the SADF Pickup Unit ------------------------------------4-57
Removing the SADF Pickup Unit ---------------------------------------------4-57
Before Removing the SADF Motor -------------------------------------------4-59
Removing the SADF Motor -----------------------------------------------------4-59
Removing the SADF Pickup Roller -------------------------------------------4-60
Removing the SADF Separation Pad ----------------------------------------4-63
Removing the Copyboard Cover ----------------------------------------------4-64

Before Removing the Copyboard Cover and Reader Unit -------------4-64
Removing the Copyboard Cover and Reader Unit -----------------------4-64
Before Removing the Copyboard Glass 
Models with copyboard ----------------------------------------------------------4-66
Removing the Copyboard Glass 
Models with copyboard ----------------------------------------------------------4-66
Before Removing the Copyboard Glass 
Models with DADF/Models with SADF --------------------------------------4-68
Removing the Copyboard Glass 
Models with DADF/Models with SADF --------------------------------------4-68
Before Removing the Flatbed Motor Unit -----------------------------------4-70
Removing the Flatbed Motor Unit ---------------------------------------------4-70
Before Removing the CIS Unit 
Models with copyboard ----------------------------------------------------------4-72
Removing the CIS Unit 
Models with copyboard ----------------------------------------------------------4-72
Before Removing the CIS unit 
Models with DADF/Models with SADF --------------------------------------4-74
Removing the CIS Unit 
Models with DADF/Models with SADF --------------------------------------4-74

Controller System ----------------------------------------------------------- 4-76

Location of Duplex Models 
(MF4580dn/MF4570dn/MF4550d/MF4553d/MF4554d/D550/D520) 4-76
Location of Single-sided Models 
(MF4450/MF4452/MF4453/MF4430/MF4420n/MF4410/MF4412) ---4-77
Removing the Control Panel Unit 
Models with FAX (MF4580dn/MF4570dn/MF4550d/MF4553d/MF4554d/
MF4450/MF4452/MF4453) -----------------------------------------------------4-79
Removing the Control Panel Unit 
Models without FAX (MF4430/MF4420n/MF4410/MF4412/D550/D520) -
4-79
Before Removing the Drive Belt 
Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/
MF4410/MF4412) -----------------------------------------------------------------4-80
Removing the Drive Belt 
Single-sided models (MF4450/MF4452/MF4453/MF4430/MF4420n/

Summary of Contents for MF4500 Series
































































































































































































































































Reviews:

No comments

Related manuals for MF4500 Series

Canon MX490 Series Setup Manual preview
MX490 Series
Brand: Canon Pages: 11
Canon MX490 Series Quick Help Manual preview
MX490 Series
Brand: Canon Pages: 2
Canon Photura 135 Review preview
Photura 135
Brand: Canon Pages: 12
Canon PIXMA Pro9000 Mark II Series Release Note preview
PIXMA Pro9000 Mark II Series
Brand: Canon Pages: 4
Unitech MP300 Quick Start Manual preview
MP300
Brand: Unitech Pages: 2
EASYPRINT Compact CM User Documentation preview
Compact CM
Brand: EASYPRINT Pages: 37
IBM RS/6000 44P Series 270 User Manual preview
RS/6000 44P Series 270
Brand: IBM Pages: 216
Oki C7550 Reference Manual preview
C7550
Brand: Oki Pages: 45
FujiFilm Apeos 5580 Reference Manual preview
Apeos 5580
Brand: FujiFilm Pages: 37
Partex Moca Quick Start Manual preview
Moca
Brand: Partex Pages: 12
A&D AD-8116 Instruction Manual preview
AD-8116
Brand: A&D Pages: 8
Xerox DocuPrint C6 User Manual preview
DocuPrint C6
Brand: Xerox Pages: 78
Printekmobile MLP-35 Quick Start Manual preview
MLP-35
Brand: Printekmobile Pages: 2
imagistics DL155 User Manual preview
DL155
Brand: imagistics Pages: 2
Lexmark 13C1101 Brochure & Specs preview
13C1101
Brand: Lexmark Pages: 8
Canon IMAGERUNNER 7086 Brochure & Specs preview
IMAGERUNNER 7086
Brand: Canon Pages: 14
Canon imageRUNNER 5055 Brochure & Specs preview
imageRUNNER 5055
Brand: Canon Pages: 4
Canon imageRUNNER ADVANCE C2225 Service Manual preview
imageRUNNER ADVANCE C2225
Brand: Canon Pages: 109

Brands by name

Popular brands

Load more brands