Turning the Machine On and Off
Turning on the machine
1.
Press the
ON
button to turn on the machine.
The
ON
lamp flashes and then remains lit green.
Confirming that the Power Is On
Note
It may take a while for the machine to start printing immediately after you turn on the
machine.
If the
Alarm
lamp lights up or flashes orange, see If an Error Occurs.
Auto power on feature
You can set the machine to automatically turn on when a print or scan operation is
performed from a computer. This feature is set to off by default.
For details on how to change the auto power on setting, see below.
From the machine
Turning on/off the Machine Automatically
From the computer
Turning off the machine
1.
Press the
ON
button to turn off the machine.
When the
ON
lamp stops flashing, the machine is turned off.
31
Summary of Contents for MG 2520
