If multiple sheets of plain paper is fed from the machine, select the setting for preventing double-feed of plain
paper using the operation panel or your computer.
* After printing is finished, disable the setting for preventing double-feed of plain paper; otherwise, the setting is
applied from the next time.
•
To set by using the operation panel
Press the
HOME
button, select
Setup
,
Device settings
, and
Print settings
in this order, and then set
Prevent paper double-feed
to
ON
.
Changing the Machine Settings Using the Operation Panel
•
To set by using your computer
In the Canon IJ Printer Utility, select
Custom Settings
in the pop-up menu, select the
Prevent paper
double-feed
check box, and then click
Apply
.
To open the Canon IJ Printer Utility, see
Opening the Canon IJ Printer Utility
.
Note
• Printing speed will be reduced if Prevent paper double-feed function is enabled.
Check8
Clean the paper feed roller.
Cleaning the Paper Feed Roller
Note
• Cleaning the paper feed roller will wear the roller, so perform this procedure only when necessary.
If you cannot remove the paper or the paper tears inside the machine, or if the paper jam error continues
after removing the paper, contact the service center.
595
Summary of Contents for MG6600 Series
