– 24 –
In the Case of Windows 2000/XP
When you are using Windows 2000 or XP, you can use
both SCSI and USB connection.
SCSI connection
Only “CANON MS800 SCSI Scanner Device” is
detected.
When using a USB connection, the following devices are
detected in due order.
CANON USB Adapter for MS
↓
CANON USB MassStorage Device
↓
CANON MS800 SCSI Scanner Device
IMPORTANT
Perform the procedures for each connection and reboot
the computer when all installations are completed.
●
If you are using Windows 2000 Professional,
“Found New Hardware Wizard” dialog appears
when new device is detected.
CANON USB Adapter for MS (only when connect-
ing via a USB port)
1
Click the Next button to proceed to the “Install Hard-
ware Device Drivers” screen.
2
Select “Search for a suitable driver for my device
(recommended)” and then click the Next button to
proceed to the “Locate Driver Files” screen.
3
Select “Specify a location” and then click the Next
button.
4
Load the setup disc into the computer’s CD-ROM drive.
5
Specify the following folder and then click the OK
button.
D:\USB Driver
(where “D” is the drive letter assigned
to your CD-ROM drive)
6
Click the Next button.
7
In the “Driver Files Search Results” screen, click the
Next button.
8
On the “Completing the Found New Hardware Wizard”
screen, click the Finish button.
CANON USB MassStorage Device (only when
connecting via a USB port)
1
Click the Next button to proceed to the “Install Hard-
ware Device Drivers” screen.
2
Select “Search for a suitable driver for my device
(recommended)” and then click the Next button to
proceed to the “Locate Driver Files” screen.
3
Select “Specify a location” and then click the Next button.
4
Load the setup disc into the computer’s CD-ROM drive.
Before You Begin...
CE-IE-323-01
07.5.14, 11:06
Page 24
Adobe PageMaker 6.5J/PPC