6. After you restart, the Fax Setup Utility launches automatically. You are prompted to enter
important information, which is outlined in steps 7 and 8.
7. On the Send Fax tab of the Fax Setup Utility, fill in your name in the Fax Heading/Unit Name box.
Fill in your fax number in the Fax Number box.
8. On the Receive Fax tab, select one of five Receive Modes to determine how faxes are received. For
more information about these Receive Modes, see Chapter 3, Using the Fax Setup Utility in your
MultiPASS Suite for Macintosh User's Guide (click the Manuals/Supplies/Help button on the Canon
Creative screen, or double-click the MultiPASS Suite for Macintosh User's Guide icon in the Desktop
Manager folder on your hard drive).
9. Click OK to save the settings. Installation and setup of the MultiPASS Desktop Manager software is
now complete.
To register your MultiPASS:
1. Return to the Canon Creative CD. Double-click the MultiPASS C555 icon if the Canon Creative
screen does not appear automatically.
2. Click the Product Registration button to register your MultiPASS C555. Follow the instructions.
Windows 95/98/2000/NT/Millennium Edition Parallel Cable Users
Start up your system in this order:
1. Make sure your computer is turned off.
2. Be sure the MultiPASS is plugged in and connected to the computer.
3. Make sure the Canon Creative CD is NOT yet inserted in your CD drive.
4. Now turn on the computer.
5. If any Windows applications start automatically, close them before you start installation. This is
very important. Make sure NO programs are running, including any virus protection programs.
Make sure Windows starts.
Click Cancel if you see a screen similar to these: "New Hardware Found", "Update Device Driver Wizard",
or "Add New Hardware Wizard".
Make sure you return to the Windows desktop.
When you see the Windows desktop, follow these steps.
1. Insert the Canon Creative CD into your CD drive. (This CD contains all the device software for your
MultiPASS, including the MultiPASS Printer and Fax drivers, MultiPASS ODBC and ScanGear™ for
MultiPASS.) Setup starts automatically. Note: If Setup does not start automatically, from the
taskbar, click Start and then Run. You see the Run screen.
2. Follow the on-screen instructions to finish installation.
•
Normally you click Next or Finish to move from one screen to the next.
•
Be sure to read each screen carefully. When specifying your fax information, you must enter a
fax heading and specify a Receive mode. Select your Receive mode based on how you set up
your phone connection in Step 2.
