![background image](http://html2.mh-extra.com/html/canon/multipass-f20/multipass-f20_basic-manual_4681292088.webp)
10-12
Troubleshooting
Chapter 10
If there are repeated paper jams
Paying attention to the following points, reload the paper.
1. Fan out the sheets of paper well so that they do not stick together.
2. Align the edges of the paper.
3. Adjust the paper guide correctly.
4. Make sure the paper stack does not exceed the paper limit mark (
|
t
).
5. Make sure the paper loaded does not exceed the capacity of the multi-purpose tray
(
p. 3-1).
6. Do not force paper into the multi-purpose tray.
7. Only use the same type of paper.
8. Use recommended print media (
p. 3-1).
If the nozzle check pattern does not print
properly
Refer to
Maintaining the printhead
, p. 9-5.
Interpreting the messages
When the Alarm light blinks
Check the message in the LCD. If there is a message, follow the instructions and correct the
error.
To resume operation, press [Resume]. The Alarm light will turn off.
If the error remains, turn off the machine and disconnect the power cord. Wait 15 seconds,
then reconnect the power cord and turn on the power.
If you cannot clear a paper jam
Turn off the machine and disconnect the power cord. Wait five seconds, reconnect the power
cord and turn on the power. If the problem has been resolved, the Alarm light will turn off.
If the Alarm light still lights even after you have turned the power on again
Contact the Canon Customer Care Center.
Summary of Contents for MultiPASS F20
