79
A
d
v
a
n
c
e
d
F
unc
tions
Dig
it
a
l Ca
m
e
ra
F
u
n
c
tio
n
s
E
Selecting the Drive Mode
Changing the Drive Mode
Available only in the
mode.
1. Set the mode switch to
.
2. Open the FUNC. menu and select (
) the drive mode icon.
3. Select (
) a setting option and close the menu.
Continuous Shooting/High-Speed Continuous Shooting
1. Press the PHOTO button halfway.
2. Press and hold the PHOTO button fully.
A series of still images will be recorded as long as you hold the PHOTO button.
Maximum number of continuous shots at one time:
These figures are approximate and vary with the recording conditions and subjects.
Sufficient space on the memory card is required. Continuous shooting stops when
card is full.
The number of frames per second will be lower when “
” (camcorder shake
warning) is displayed on the screen.
Single
Records a single still image when you press the
PHOTO button.
Continuous Shooting
Captures a quick series of still images while you press
the PHOTO button. For the number of frames per
second, refer to the table on the next page.
High-Speed Continuous
Shooting
AEB
(Auto Exposure Bracketing)
The camcorder records a still image in three different
exposures (dark, normal, light in 1/2 EV steps),
allowing you to choose the shot you like the best.
Self-timer
Records a still image after a self-timer delay (
51).
Still Image Size
Frames per Second
Maximum Number of
Continuous Shots
Normal speed
High speed
L
1152 x 864
2.5 frames
4.2 frames
10 images
S
640 x 480
2.5 frames
4.2 frames
60 images
PHOTO button
Mode switch
FUNC. button
Joystick
