Canon MX470 User Manual Download

Page: 697 / 913

Errors When You Receive a Fax

If an error occurs when you receive a fax, the error number is printed on RX REPORT (there are some
errors for which the cause is also printed).

The causes corresponding to the error numbers are as follows.

No.

Cause

Action

#003 It takes too long to

receive a page.

Contact the sender and have the sender divide the fax or set the image quality
(Fax resolution) to a lower setting and resend it.

#005 No answer.

When receiving a fax manually, the machine could not detect the signals from the
sender's fax machine.

Contact the sender and have the sender resend it, or set the machine to receive
the fax automatically.

#037 Memory is full.

The machine could not receive a fax because its memory is full.

Delete contents in memory, then ask the sender to resend the fax. See

Document

Stored in Machine's Memory

#046 Reception has been

rejected due to the
specified fax rejection
condition.

Reception has been rejected because the fax matches the fax rejection condition
specified by

FAX RX reject

Security control

under

Fax settings

For details, see

Rejecting Fax Reception

#099 The

Stop

button was

pressed during reception.

The

Stop

button was pressed to cancel reception of the fax. Contact the sender

and have the sender resend it if necessary.

697

Summary of Contents for MX470


















































































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for MX470

Reviews:

Related manuals for MX470

Brands by name

Popular brands

Canon MX470, User Manual

Search results

Summary of Contents for MX470

Reviews:

Related manuals for MX470

Brands by name

Popular brands