19
Scanning with Scanner Start Button
You can copy a job registered in the CaptureOnTouch Job Tool to the
scanner, then scan according to those scan job settings by pressing
the scanner's start button.
In this scanning method, since the NA10 controls the scanner, the
computer is not needed to execute scanning.
1
Start the CaptureOnTouch Job Tool.
The [Scan from app job] screen appears.
2
Select the scanner.
A
Click [
].
B
Select the scanner on the [Select Scanner] screen.
3
Click [ ], or click [
] — [Copy job registration settings].
4
Enter the administrator password.
Enter the same password as for the Web menu. For details, see
“Displaying the Web Menu of This Device” (p. 21).
5
Tap [OK].
All registered jobs are registered in the scanner at once.
CAUTION
The number of jobs that can be copied depends on the scanner.
6
Select the job number on the scanner and press the start
button.
Scanning executes according to the scan settings of the selected
job number.
During scanning, the power light of the device blinks blue. It lights
steadily blue when scanning and data transmission are
completed.
CAUTION
• If the scanner does not detect the document (there is no
document in the feeder) when scanning starts, the Connection
lamp lights orange.
• If data cannot be sent, such as because of an invalid
destination, a transmission error occurs and the Connection
lamp lights red.
• If you copy a job registered in the CaptureOnTouch Job Tool to
the scanner, you cannot use the favorite settings assigned to
the job buttons on the scanner with CaptureOnTouch. To use
the CaptureOnTouch favorite settings, first delete any jobs
copied to the scanner with the CaptureOnTouch Job Tool.
To Delete Jobs Copied to the Scanner
Jobs copied to the scanner can be deleted.
1
Delete the job(s) from the CaptureOnTouch Job Tool.
For details, see “Deleting jobs” (p. 12), “Deleting all jobs” (p. 18).
Hint
To delete all jobs copied to the scanner, delete all jobs from the
CaptureOnTouch Job Tool.
2
Select the scanner.
A
Click [
].
