Océ VarioPrint 6000+ Customer Expectations Document
Version 1
Océ VarioPrint 6000+ Series Customer Expectations Document
Page 10
2.9 Professional Input/Output Accessories
The Océ VarioPrint 6000+ Series features many input and output accessories that
allow customers to complete large jobs directly from the machine. For more
information on the input and output accessories that can be attached to the
machine, see
on p. 22.
Input Accessories
•
PIM (Paper Input Module)-A1 (standard); two additional PIM-A1s (optional) can
be attached for a maximum of three.
•
Lasermax Roll System (feeder and cutter) (optional)
Optional Finishing (Output) Accessories
•
IIM (Internal Interface Module)-A1 (standard)
•
High Capacity Stacker 2.1 (One High Capacity Stacker is mandatory (standard));
(two additional High Capacity Stackers (optional) can be attached for a maximum
of three)
•
High Capacity Stacker with Set Finisher
•
iXDP (Integrated eXchangeable Die Punch Unit)
•
MEM (Media Enhancement Module)
•
PrintGuard 3 (standard on the TP+ and MICR+ lines)
•
Océ DFS30-N Tape Binder
•
Booklet Maker BLM200
•
Booklet Maker BLM550
•
Booklet Maker BLM6300
•
GBC Power Punch
•
Glue Binder
•
PowerLift
IMPORTANT
•
The Set Finisher cannot be purchased separately and installed after purchase.
•
The Print Guard 3 cannot be combined with the MEM.
•
Only one Set Finisher can be a part of a configuration.
•
The PowerLift is used only with the High Capacity Stacker 2.1.
6
When the Set Finisher is installed on the Océ VarioPrint 6320+ machine, all sheets printed to the Set Finisher
are printed at the Océ VarioPrint 6250+ print speed (125 sheets per minute).
7
Can only be attached to the Océ VarioPrint 6160 Ultra+, TP+, and MICR+ lines.
8
Can only be attached to the Océ VarioPrint TP+ and MICR+ print engines, and always requires a combination of
two units.
