VII. MAINTENANCE AND SERVICING
A. Periodic Replacement Parts
This paper deck has no periodic replacement parts.
Note:
Periodic replacement parts are the parts that must be replaced at regular intervals, even
if they are functioning properly and show no signs of wear. (Failure of these parts can
seriously affect printer performance.) These parts should be replaced during a regular
service visit closest to the end of the parts expected life.
B. Expected Lives of Consumable Parts
Consumable parts are the parts that have possibility of requiring replacement due to the dete-
rioration or damages at least once during the warranty period and that can be used until fail-
ures occur. The expected life of the consumable parts are shown in Table 4-7-1.
Table 4-7-1
Note:
The expected life in the above table is an estimated value and is subject to change
according to the experiential data.
C. Regular Servicing Schedule
No parts need regular service.
D. Standard Tools
Required standard tools for the paper deck service are the same as for the printer.
E. Special Tools
This paper deck has no special tools for service.
F. List of Lubricants and Cleaners
Table 4-7-2
4 - 20
CHAPTER 4
Part No.
Remarks
1
Feed roller and separation
roller
No.
Part name
RF5-1834-000
Replace the feed rollers and
separation rollers together.
Qt’y
Expected life
2
350,000 prints
As of January,1999
Components
Remarks
1
2
Alcohol: ethyl
(pure or
denatured) or
isopropyl (pure
or denatured)
No.
Material name
C
2
H
5
OH,
(CH
3
)
2
CHOH
•
•
Use
Cleaning: plastic,
rubber, external parts
Purchase locally
Flammable: keep away
from flame
Lubricating oil
Petroleum mineral oil
Apply between gear
and shaft
• Tool No. CK-8003
(100 ml bottle)
Lubricating
agent
Apply to gears
Never apply to the
molding
•
3
Lithium grease
Tool No. CK-8005
(40 g bottle)
Summary of Contents for PD-82
