Turning the pulley in the counterclockwise direction moves the Waste stopper [1] in the direction indicated by the arrow. Keep
tuning the pulley until the flanges [2] come to the positions indicated in the figure below.
1-10) Put a hand into the area where the Waste paper unit is housed. Hold the center edge [2] of the Waste stopper [1], and move
it in the direction indicated by the arrow.
If the Waste stopper moves without problems, other factors may be a cause. Install the parts by reversing the procedure from
step 1-6).
If the movement of the Waste stopper is not good, go to step 2).
2) Replace the Waste stopper unit
144
