4. Install the chip set sliding plate, then it will fix the chip set holder as the picture.
5. it is easy to install cartridge into printer. Use the lock for cover in the right place as the
picture show as below.
Caution
：
Refill the ink when the ink lower because the ink level detection
have been cancel.
How to cancel the ink level detection function
1. When you install cartridge into printe and
turn on the power switch, the printer screen will show
the information:
Can not correctly detect the remaining ink amount, check the ink
cartridge
. Please press right button one time.
2.
the printer screen will show the information:
please check: 1.check 2.information.
please choose
“2 information” and press “OK” button.
3.
the printer screen will show the information:
Installed ink cartridge was exhausted. As the ink
remaining amount is unknown, so the printer to stop the action.
Please press right
