Printing Out Network Setting Information
You can print out the network settings of the machine such as its IP address and SSID.
Important
• This print out contains valuable information about your computer. Handle it with care.
1.
Make sure that the machine is turned on.
2.
Load a sheet of A4 or Letter-sized plain paper.
3. Select
Setup
on the
HOME
screen.
The menu screen is displayed.
4. Select
Device settings
, then use the
OK
button to confirm the selection.
5. Use the
button to select
LAN settings
, then use the
OK
button to confirm the selection.
6. Use the
button to select
Confirm LAN settings
, then use the
OK
button to confirm the
selection.
7. Use the
button to select
Print LAN details
, then use the
OK
button to confirm the
selection.
8. Use the
button to select
Yes
, then use the
OK
button to start printing.
The machine starts printing the network setting information.
The following information on the machine's network setting is printed out.
Item
Explanations of the item
Setting
Wireless LAN
Wireless LAN
Enable/Disable
Connection
Status of the Wireless LAN
Active/Inactive
MAC Address
MAC Address
XX:XX:XX:XX:XX:XX
SSID
SSID
SSID of the wireless LAN
Communication Mode
Communication Mode
Infrastructure
Channel
Channel
XX (1 to 13)
Encryption
Method of the Encryption
none/WEP/TKIP/AES
WEP Key Length
WEP Key Length
Inactive/128/64
222
Summary of Contents for PIXMA MG5500 Series
