Canon PowerShot A1400 Extended User Manual Download

Page: 173 / 229

173

Contents

Chapter Contents

Still Images

Cropping Images Before Printing (Cropping)

By cropping images before printing, you can print a desired image

area instead of the entire image.

Choose [Cropping].

After following step 1 in

“Configuring Print Settings”

(

172

) to access the printing

screen, choose [Cropping] and

press the <

> button.

A cropping frame is now displayed,

indicating the image area to print.

Adjust the cropping

frame as needed.

To resize the frame, move the

zoom lever.

To move the frame, press the

> buttons.

To rotate the frame, press the

> button.

Press the <

> button,

press the <

> buttons to

choose [OK], and then press the

> button.

Print the image.

Follow step 7 in “Easy Print”

(

171

) to print.

Summary of Contents for PowerShot A1400






































































































































































































































Search results

Summary of Contents for PowerShot A1400

Reviews:

Related manuals for PowerShot A1400

Brands by name

Popular brands

Canon PowerShot A1400, Extended User Manual

Search results

Summary of Contents for PowerShot A1400

Reviews:

Related manuals for PowerShot A1400

Brands by name

Popular brands