99
PowerShot A85/PowerShot A75
How to Connect the Camera to a Computer and Prepare to Transfer Data
1
Attach the supplied interface cable to the computer’s USB port and the camera’s
DIGITAL terminal as shown below.
2
Set the mode switch to the playback mode and turn the camera’s power on.
This will prepare the camera to exchange data with the computer.
CD-ROMs in the Package
•Canon Digital Camera Solution Disk
•ArcSoft Camera Suite 1.3
See
ArcSoft Camera Suite 1.3 CD-ROM
(p. 77) for information about the features and
installation procedures for the programs on the disk.
Non-Supported Programs and Features
The camera does not record RAW images.
USB Port
Interface Cable
To the DIGITAL
Terminal
1. Open the terminal cover by slipping
a fingernail under its left edge.
2. Insert the interface cable connector
all the way into the digital terminal
until it clicks.