Changing Shooting Function Settings
151
Changing the Way the Image Displays Right After Shooting
You can change the way the image displays right after shooting.
∆
Choose [Review Info], then press the
qr
buttons to choose an option.
Displaying the Overlay
You can display gridlines for vertical and horizontal guidance, or a 3:2 guide
to confirm the printable area for postcard size prints.
∆
Choose [Disp. Overlay], then press the
qr
buttons to choose an option.
Off
Displays the image only.
Detailed
Displays detailed information
(pp. 44, 165)
Focus Check
The area inside the AF frame is
magnified, allowing you to check
the focus. The procedure is the
same as in “Checking the Focus”
(p. 115).
Grid Lines
A grid overlays the display.
3:2 Guide
Gray bars will appear on the
top and bottom of the display.
This area will not print when
printing on paper with a 3:2
aspect ratio.
Both
Both grid lines, and the 3:2
guide will display.
•
In
mode, you cannot set [3:2 Guide] or [Both].
•
Grid Lines will not be recorded on the image.
•
The gray areas displayed with [3:2 Guide] are the areas that will not be
printed. The actual image recorded will include the portion in the gray areas.
COP
Y
Summary of Contents for PowerShot SX210 IS
Page 12: ...12 4 COPY...
