90
You can set the shutter to the speed at which you want to shoot. The camera
will set the appropriate aperture value for the shutter speed you set.
M
stands for “Time value”.
Set the mode dial to
M
.
Make the setting.
∆
Turn the
Â
dial to set the shutter speed.
Shoot.
Available Shutter Speeds
•
2" indicates 2 seconds, 0"3 indicates 0.3 second and 1/160 indicates 1/160 second.
•
The fastest shutter speed when using the flash is 1/2000 second. The camera
automatically resets the shutter speed to less than 1/2000 second if a faster
shutter speed is chosen. However, if [Safety FE] is set to [Off] (p. 95), the fastest
shutter speed is 1/500 second.
•
In addition, when the flash fires, the camera may automatically adjust the current
shutter speed to the optimum speed for the shooting conditions.
•
Depending on the zoom position, some shutter speeds may not be available.
Setting the Shutter Speed
15", 13", 10", 8", 6", 5", 4", 3"2, 2"5, 2", 1"6, 1"3, 1", 0"8, 0"6, 0"5, 0"4, 0"3, 1/4, 1/5, 1/6, 1/8,
1/10, 1/13, 1/15, 1/20, 1/25, 1/30, 1/40, 1/50, 1/60, 1/80, 1/100, 1/125, 1/160, 1/200, 1/250,
1/320, 1/400, 1/500, 1/640, 1/800, 1/1000, 1/1250, 1/1600, 1/2000, 1/2500, 1/3200
•
When shutter speeds of 1.3 seconds or slower are used, images are
processed to eliminate noise after being taken. A certain amount of
processing time may be needed before you can take the next shot.
•
You should set the [IS Mode] to [Off] when lowering the shutter speed
and shoot with a tripod (p. 152).
If the aperture value appears in orange when the shutter button is pressed
halfway, the scene has exceeded the correct exposure limits. Adjust the shutter
speed until the aperture value appears in white. Safety Shift can also be used
(p. 91).
What if the aperture value appears in orange?
COP
Y
Summary of Contents for PowerShot SX210 IS
Page 12: ...12 4 COPY...
