Canon PowerShot V10 Advanced User'S Manual Download

Page: 227 / 303

61: Selected SSID wireless LAN network not found

Are any obstacles blocking the line of sight between the camera and the antenna
of the access point?

• Move the antenna of the access point to a position clearly visible from the point of

view of the camera.

What to check on the camera

Does the SSID set on the camera match that of the access point?

• Check the SSID at the access point, then set the same SSID on the camera (

What to check at the access point

Is the access point turned on?

• Turn on the power of the access point.

If filtering by MAC address is active, is the MAC address of the camera in use
registered at the access point?

• Register the MAC address of the camera used to the access point. The MAC

address can be checked on the [

MAC address

] screen (

64: Cannot connect to wireless LAN terminal

Are the camera and the access point set to use the same encryption method?

• The camera supports the following encryption methods: WEP, TKIP, and AES (

If filtering by MAC address is active, is the MAC address of the camera in use
registered at the access point?

• Register the MAC address of the camera used to the access point. The MAC

address can be checked on the [

MAC address

] screen (

65: Wireless LAN connection lost

Are any obstacles blocking the line of sight between the camera and the antenna
of the access point?

• Move the antenna of the access point to a position clearly visible from the point of

view of the camera.

The wireless LAN connection was lost, for some reason, and the connection
cannot be restored.

• The following are possible reasons: excessive access to the access point from

another device, a microwave oven or similar appliance in use nearby (interfering
with IEEE 802.11b/g/n (2.4 GHz band)), or influence of rain or high humidity.

227

Summary of Contents for PowerShot V10
















































































































































































































































































































Search results

Summary of Contents for PowerShot V10

Reviews:

Related manuals for PowerShot V10

Brands by name

Popular brands

Canon PowerShot V10, Advanced User'S Manual

Search results

Summary of Contents for PowerShot V10

Reviews:

Related manuals for PowerShot V10

Brands by name

Popular brands