63
RE-350 32bit Sample Code (
\32BITSDK
)
Notes:
1) This example application was written and compiled with Microsoft C/C++ and
SDK
Version 4.0 (32 bits ONLY).
Open the project in Microsoft Visual C/C++ 4.0 to edit and recompile.
2) The
RE-350
driver (
RE350.DLL
) is located in
.\EXAMPLE\RE350
and has been setup as a sub-project of
EXAMPLE
.
It will be automatically updated if
EXAMPLE
is set as the project. The output is directed to the
EXAMPLE\RELEASE
directory so any changes made to the
DLL
will be automatically loaded by the application next time it is run.
EXAMPLE
explicitly loads and unloads the
DLL
using LoadLibrary() and FreeLibrary() to facilitate this (see
EXAMPLE.C
).
3)
RE350.C
and
RE350.H
constitute the basic driver and are generalized to work with any application. All of the
functions return an error code (defined in
RE350.H
) to indicate whether the operation was successful.
Initialize communications with the
RE-350
:
int FAR PASCAL
RE350_Open( int iComPort )
int iComPort:
RE350_COM1-RE350_COM4
Execute an
RE-350
command:
int FAR PASCAL
RE350_Command( int iDevice, int nCmd, WORD wRequest, LPWORD lpwResponse );
int iDevice:
device 0-3 (check dipswitch on the back)
int nCmd:
Command defined in RE350.H.
WORD wRequest:
Request data if required by command.
(Use RE350_NULL_REQUEST if not required).
LPWORD wRequest:Pointer to response (or NULL).
Close communications with the
RE-350
:
VOID FAR PASCAL
RE350_Close( VOID );
4)
EXAMPLE.C
is a simple application which demonstrates the operation of the driver. After getting this to compile in
your environment, you can add additional commands (via RE350_Command) to test the camera’s operation.
All of the
RE-350
commands are implemented through this function.
All rights are reserved. No part of this document may be photocopied, reproduced, translated to another language, stored in a
retrieval system, or transmitted in any form without the prior written consent of Canon U.S.A., Inc.
The information contained in this document is subject to change without notice. Canon U.S.A., Inc. makes no warranty of any
kind with reguard to this written material. Canon U.S.A., Inc. assumes no responsibility for any errors that may appear in this
document or for incidental or consequential damages in connection with the furnishing, performance or use of this manual.
Canon is a registered trademark of Canon, Inc. ©1996 Canon U.S.A., Inc. 11.13.96
All trademarks and registered trademarks are the property of their respective owners.
This product is provided AS IS. For questions regarding product operation contact Canon Information
Technology Services at 1-800-828-4040
Summary of Contents for RE-350
Page 1: ...1 RE 350 Control Interface Commands RE 350 Video Visualizer VISUAL COMMUNICATION SYSTEMS v1 0 ...
Page 55: ...55 5 1 RS 232C Control Cable Pin Assignment 5 0 Control Cable Pin Assignments RE 350 RE 350 ...
Page 56: ...56 RE 350 Control Cable Pin Assignments 9 Pin DSUB RS 232C RE 350 RE 350 ...
