background image

ENG-6

Lens mount index

Lens release button

Dust cap

Attaching the Lens

Align the lens mount indexes of the lens and 

camera, and turn the lens clockwise until you 

hear a click.

Detaching the Lens

Turn the lens counterclockwise while pressing 

the camera’s lens release button. Detach the 

lens once it has stopped turning.

Please refer to the camera's instructions for 

details.

 

z

 Set the camera’s power switch to OFF when 

attaching or detaching the lens.

 

z

 Attach the lens cap before detaching the lens 

from the camera.

 

z

 After detaching the lens, place the lens with the 

rear end up and attach the dust cap to prevent 

the lens surface and contacts from getting 

scratched. Make sure the lens and dust cap 

mount indexes are aligned when attaching the 

dust cap.

 

z

 Contacts that are scratched, soiled, or have 

fingerprints on them may result in faulty 

connections or corrosion, which may lead to 

malfunctions. If the contacts get soiled, clean 

them with a soft cloth.

 

z

 The lens mount has a rubber ring to improve 

dust-resistance and water-resistance 

performance. This rubber ring may cause 

friction marks to appear around the camera’s 

lens mount, although this will have no effect on 

usage.

 

z

Rubber rings can be replaced at Canon Service 

Center. (chargeable)

1.  Attaching and Detaching the Lens

Summary of Contents for RF 24-70mm F2.8 L IS USM

















Reviews: