ENG-6
Lens mount index
Lens release button
Dust cap
Attaching the Lens
Align the lens mount indexes of the lens and
camera, and turn the lens clockwise until you
hear a click.
Detaching the Lens
Turn the lens counterclockwise while pressing
the camera’s lens release button. Detach the
lens once it has stopped turning.
Please refer to the camera's instructions for
details.
z
Set the camera’s power switch to OFF when
attaching or detaching the lens.
z
Attach the lens cap before detaching the lens
from the camera.
z
After detaching the lens, place the lens with the
rear end up and attach the dust cap to prevent
the lens surface and contacts from getting
scratched. Make sure the lens and dust cap
mount indexes are aligned when attaching the
dust cap.
z
Contacts that are scratched, soiled, or have
fingerprints on them may result in faulty
connections or corrosion, which may lead to
malfunctions. If the contacts get soiled, clean
them with a soft cloth.
z
The lens mount has a rubber ring to improve
dust-resistance and water-resistance
performance. This rubber ring may cause
friction marks to appear around the camera’s
lens mount, although this will have no effect on
usage.
z
Rubber rings can be replaced at Canon Service
Center. (chargeable)
1. Attaching and Detaching the Lens
Summary of Contents for RF15-35mm F2.8 L IS USM
Page 1: ...ENG Instructions ...
