33
Adjusting the Brightness
1
Check that the printer power is on.
2
Insert a memory card to which JPEG
data has been saved (see page 28).
3
Press the Maintenance button.
The
icon appears in
Required
Sheets
.
4
Press the
(right) button five times.
The
icon is displayed.
5
Press the Print button.
The
icon appears in
Optimize
Image
.
6
Adjust the brightness by using the
(left) and
(right) buttons.
You can adjust the brightness within the following
setting range by operating the buttons. The base
setting is 0.
: As the number increases in the negative
direction, the brightness becomes darker
(-1 to -9).
: As the number increases in the positive
direction, the brightness becomes brighter
(1 to 9).
7
Press the Print button.
The data is displayed in the viewer at the
brightness that was set.
To exit Maintenance mode, press the
Maintenance
button.
Adjusting the Brightness and Contrast
The brightness and contrast of the viewer display can be adjusted from maintenance mode.
Summary of Contents for S820D
Page 66: ...64...
Page 67: ......
Page 68: ...QA7 1957 V01 12345678 CANON INC 2002 PRINTED IN THAILAND...