153
Chapter 5 Administrator Settings
❏
IEEE802.1X settings
When using IEEE802.1X authentication, specify the
authentication method and configure its settings.
• IEEE 802.1X
Set this to [ON] to enable selection of an authentication
method (EAP-TLS, EAP-TTLS, PEAP).
Select [EAP-TLS], [EAP-TTLS], or [PEAP], and
configure the necessary settings.
• Login name
Enter the login name required for authentication.
• Password
When either [EAP-TTLS] or [PEAP] is selected, enter
the password associated with the login name.
• CA Certificate
When either [EAP-TLS] or [PEAP] is selected, import
the CA certificate used for authentication.
Save the CA certificate file (ca_cert.cer) to the root
directory of the USB memory device, and press [Import]
after connecting it to the scanner to import the certificate
file. To update a CA certificate file, press [Delete] to
delete the registered certificate file, and import the new
file.
• Client Certificate
When [EAP-TLS] is selected, import the client
certificate used for authentication.
Save the client certificate file (cli_cert.pfx) to the root
directory of the USB memory device, and press [Import]
after connecting it to the scanner to import the certificate
file. To update a client certificate file, press [Delete] to
delete the registered certificate file, and import the new
file.
• TTLS internal protocol
When [EAP-TTLS] is selected, specify the internal
protocol (MSCHAPv2 or PAP) to be used.
