43
Chapter 3 Handling
2.
Preparing the Scanner
When placing a document in the scanner, pull out the tray extension based on the size of the document and raise the document eject
stopper if necessary. After placing the document, change the feed method (i.e., set [Non Separation Feeding Mode] to [ON] or
[OFF]) in the ScanFront's Detailed Settings screen according to the type of document placed.
❏
Preparing the Document Feed Tray and
Eject Tray
Prepare the trays in accordance with the type of document.
1.
Open the document eject tray
a
.
2.
Open the feed support
b
.
Hint
• Pull out the center tray extension when output documents are
likely to fall out of the tray.
• When scanning documents of different size at the same time,
the scanned documents may not collect neatly on the eject
tray. In such cases, scan with the tray extension extended.
