CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
2-86
Line Connection Reception Test (6-9: LINE DETECT)
A press on ‘9’ on the keypad from the FACULTY TEST menu selects the LINE DETECT
test. On Test Menu 1, you can check C1, FC, state of hooking of the eternal telephone, and
the detection of signals by the NCU package.
Test Menu 1
A press on ‘1’ on the keypad from the LINE DETECT menu selects test menu 1. In this
test, the LCD indication changes from ‘OFF’ to ‘ON’ when C1, FC, or off-set of the external
telephone is detected in relation to the telephone line.
Test Menu 3
A press on ‘3’ on the keypad from the LINE DETECT menu selects test menu 3. In this
test, the LCD indication changes from ‘OFF’ to ‘ON’ when CNG is detected in relation to
the telephone terminal.
ESS Test (6-#: ESS TEST)
A press on the # key from the FACULTY TEST menu executes the ESS (Energy Save
Stanby: hereafter, ESS) test. In the course of execution, the test causes the machine to be in
ESS mode, causing all LEDs except the Energy Saver key in the control panel to go OFF.
The machine ends ESS mode for the following:
•
The Energy Saver key is pressed.
•
Print data arrives from the PC.
•
A fax arrives.
*1
•
Off-hook set is detected.
*1
•
The report output time arrives.
*1
•
The timer call time arrives.
*1
*1: If equipped with fax functions.
3.21.9 BOOK Read Test (8: BOOK TEST)
A press on ‘8’ on the keypad from the TEST MODE menu selects the BOOK test. A press
on ‘4’ or ‘6’ on the keypad during this test initializes the corresponding parameter as de-
scribed below:
‘4’ on the Keypad
The book read position parameter (#6 SCANNER 7: CCD 21, 23) is initialized.
‘6’ on the Keypad
The BOOK read parameter (#6 SCANNER 7: CCD 18
*1
, 19, 21, 23) is initialized.
*1: The term “CCD18 setting” refers to the setting for original read position adjustment ex-
ecuted by a press on ‘3’ of the keypad under ‘CCD TEST’ of ‘TEST MODE’.
