COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
5-51
CHAPTER 5 MECHANICAL SYSTEM
1) Remove the white roller. (See 2.8.3.1)
2) Disconnect the 3 connectors [1].
3) Remove the E-ring [2] and the bushing
[3].
4) Remove the 3 screws [4], and detach the
ADF motor unit [5].
The ADF motor is posi-
tioned using a special tool
and, therefore, cannot be
adjusted in the field. Do not
remove the ADF motor
from the motor base.
[4]
[3]
[5]
[1]
[4]
[1]
[2]
F05-208-07
2.8.1.3 Removing the ADF Motor Unit
