CHAPTER 2 USING THE MACHINE
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON SmartBase PC1200s/iR1200s REV. 0 DEC. 2001
2-50
3.11
Setting the Original Reading Functions (#6 SCANNER)
7. CCD Settings
No.
0 to 18
19
21
23
24
25
26 to 33
34
Item
1.Bit SW
2. SLICE
3. GAMMA
4. Numeric
5. LUT 1 fno
6. LUT 2 adj
7. CCD
8. MODEL
Description
Do not change the setting; otherwise, the read image quality can be lost.
partially hanged
not used
Item
Do not change.
shading position adjustment
*1
left/right edge read start position adjustment
(book mode)
leading edge read start position adjustment
(book mode)
leading edge read start position
(ADF mode)
trailing edge read end position adjustment
(ADF mode)
Do not change.
original feed speed adjustment
(ADF mode)
Unit of adjustment
-
1 unit = 0.1 mm
1 unit = 0.03 mm
1 unit = 0.1 mm
1 unit = 0.1 mm
1 unit = 0.1 mm
-
1 unit = approx. 0.5 mm
*1: Make adjustments only When white lines occur. (See 3.1.12 of Chapter 7.)
The factory settings of these adjustments differ from machine to machine. For instructions
on adjustment, see 1.2.4 of Chapter 7 or 1.3.4 of Chapter 7.
