4
4
4-4
4-4
Error Code > Service Error Code
Error Code > Service Error Code
No. T/R
Description
##670 [T] at time of V.8 late start, the V.8 ability of DIS front the receiving party is expected to be
detected, and the CI signal is expected to be transmitted in response; however, the
procedure fails to advance, and the line is released because of T1 time-out.
##671 [R] at time of V.8 arrival, procedure fails to move to phase 2 after detection of CM signal
from caller, causing T1 time-out and releasing line.
##672 [T] at time of V.34 transmission, a shift in procedure from phase 2 to phase 3 and
thereafter stops, causing the machine to release the line and suffer T1 timeout.
##673 [R] at time of V.34 reception, a shift in procedure from phase 2 to phase 3 and thereafter
stops, causing the machine to release the line and suffer T1 timeout.
##674 [T] at time of V.34 transmission, a shift in procedure from phase 3 and phase 4 to the
control channel and thereafter stops, causing the machine to release the line and
suffer T1 timeout.
##675 [R] at time of V.34 reception, a shift in procedure from phase 3 and phase 4 to the control
channel and thereafter stops, causing the machine to release the line and suffer T1
timeout.
##750 [T] at time of ECM transmission, no meaningful signal is received after transmission of
PPS-NULL, causing the procedural signal to be transmitted more than specified.
##752 [T] at time of ECM transmission, DCN is received after transmission of PPS-NULL.
##753 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-NULL, or T5 time-out (60 sec) has occurred.
##754 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-NULL.
##755 [T] at time of ECM transmission, no meaningful signal is received after transmission of
PPS-MPS, causing the procedural signal to be transmitted more than specified.
##757 [T] at time of ECM transmission, DCN is received after retransmission of PPS-MPS.
##758 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS, or T5 time-out (60 sec) has occurred.
##759 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS.
##760 [T] at time of ECM transmission, no meaningful signal is received after transmission of
PPS-EOM, causing the procedural signal to be transmitted more than specified.
##762 [T] at time of ECM transmission, DCN is received after transmission of PPS-EOM.
##763 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-MPS, or T5 time-out (60 sec) has occurred.
##764 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOM.
##765 [T] at time of ECM transmission, no meaningful signal is received after transmission of
PPS-EOP, causing the procedural signal to be transmitted more than specified.
##767 [T] at time of ECM transmission, DCN is received after transmission of PPS-EOP.
##768 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOP, or T5 time-out (60 sec) has occurred.
##769 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of PPS-EOP.
##770 [T] at time of ECM transmission, no meaningful signal is received after transmission of
EOR-NULL, causing the procedural signal to be transmitted more than specified.
##772 [T] at time of ECM transmission, DCN is received after transmission of EOR-NULL.
No. T/R
Description
##773 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-NULL, or T5 time-out (60 sec) has occurred.
##774 [T] at time of ECM transmission, ERR is received after transmission of EOR-NULL.
##775 [T] at time of ECM transmission, no meaningful signal is received after transmission of
EOR-MPS, causing the procedural signal to be transmitted more than specified.
##777 [T] at time of ECM transmission, DCN is received after transmission of EOR-MPS.
##778 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission EOR-MPS, or T5 time-out (60 sec) has occurred.
##779 [T] at time of ECM transmission, ERR is received after transmission of EOR-MPS.
##780 [T] at time of ECM transmission, no meaningful signal is received after transmission of
EOR-EOM, causing the procedural signal to be transmitted more than specified.
##782 [T] at time of ECM transmission, DCN is received after transmission of EOR-EOM.
##783 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-EOM, or T5 time-out (60 sec) has occurred.
##784 [T] at time of ECM transmission, ERR is received after transmission of EOR-EOM.
##785 [T] at time of ECM transmission, no meaningful signal is received after transmission of
EOR-EOP, causing the procedural signal to be transmitted more than specified.
##787 [T] at time of ECM transmission, DCN is received after transmission of EOR-EOP.
##788 [T] at time of ECM transmission, the procedural signal has been transmitted more than
specified after transmission of EOR-EOP, or T5 time-out (60 sec) has occurred.
##789 [T] at time of ECM transmission, ERR is received after transmission of EOR-EOP.
##790 [R] at time of ECM reception, ERR is transmitted after transmission of EOR-Q.
##791 [T/R] while ECM mode procedure is under way, a signal other than a meaningful signal is
received.
##792 [R] at time of ECM reception, PPS-NULL cannot be detected over partial page processing.
##793 [R] at time of ECM reception, no effective frame is received while high-speed signal
reception is under way, thus causing time-out.
##794 [T] at time of ECM reception, PPR with all 0s is received.
##795 [T/R] a fault has occurred in code processing for communication.
##796 [T/R] a fault has occurred in decoding processing after reception of ECM
T-4-2
