5
5
Service Mode
Service Mode
5-2
5-2
Service Mode > Outline > Using Service Mode
Service Mode > Outline > Using Service Mode
Outline
Service Mode Composition
The Board's service mode consists of the following 10 items (#1 through #10):
Item
Name
Description
#1 SSSW
service soft switch
Use it to register/set up functions related to
basic fax services (e.g., error management,
echo remedies, communication remedies).
#2 MENU
menu switch setting
Use it to register/setup functions needed
at time of installation (e.g., NL equalizer,
transmission level).
#3 NUMERIC Param numeric parameter settings
Use it to enter numeric parameters.
#4 NCU
not to be used for service work All settings under the item will collectively set
in response to the #5 TYPE setting.
#5 TYPE
country settings
Use it to cause the Board to automatically
set data under #4 NCU so that it complies
with the communication requirements of the
country in question.
#6 ISDN
-
-
#7 PRINTER
printer functions setup
Use it to register/set up functions related
to basic printer services (e.g., reduction for
received images).
#8 CLEAR
data initialization
Use it to reset various data to initial settings.
#9 TEST
test mode
Use it to execute various tests.
#10 REPORT
service report
Use it to print out reports.
Caution:
#6 ISDN is not used in this machine.
T-5-1
Using Service Mode
1) Press the User Mode key "
" on the control panel.
2) Press the keys 2 and 8 on the keypad at the same time.
3) Press the User Mode key "
" on the control panel once again.
The machine will indicate the accessories that are connected to it (e.g., FEEDER, FAX,
BOARD).
Select [FAX] to use service mode items available for the Board.
COPIER
FEEDER
BOARD
FAX
SERVICE MODE
LEVEL 1
COPIER: service mode of the host machine.
FEEDER: service mode of the ADF. (*)
FAX: service mode of the fax. (*)
BOARD: service mode of an accessory board. (*)
*: Indicated only if installed.
F-5-1
