COPYRIGHT© 2002 CANON INC.
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 2 BASIC OPERATIONS
2-2
1.1.2 Feeding to the Cutting Position (trim mode only)
On arrival at the cutter unit, the booklet is moved between the upper blade and the lower
blade (cutter unit) and then to the pressing section. (The upper blade is held in up position.)
The stopper mounted to the pressing section is normally kept upright, and is moved to a
specific position to suit each paper size while initialization takes place at the start of booklet
copying. Then, it is moved for fine adjustment (a specific period of time after the entrance
sensor PS101 goes ON) in keeping with the movement of the booklet.
The folded side of the booklet is hit against the stopper and stopped a specific period of
time after the feeding sensor PS102 goes ON, thus determining its feeding length (i.e., dis-
tance from the folded edge to the cutting position).
[1] Upper blade
[2] Pressing section
[3] Stopper
[4] Feeding sensor (PS102)
[5] Lower blade
[6] Booklet
[7] Entrance sensor (PS101)
F02-101-02
REF.
Through Mode (Trim OFF)
Normally, the stopper mounted to the pressing section is held upright. It is
shifted down as soon as feeding starts so that the booklet will not be cut
while it forms a path for the booklet in the direction of delivery.
[6]
[7]
[1]
[2]
[3]
[4]
[5]
Summary of Contents for Two-Knife Booklet Trimmer-A1
Page 129: ...COPYRIGHT 2002 CANON INC 2000 CANON BOOKLET TRIMMER A1 REV 0 FEB 2002 CHAPTER 6 APPENDIX ...
Page 132: ...User Mode COPYRIGHT 2002 CANON INC 2000 CANON BOOKLET TRIMMER A1 REV 0 FEB 2002 ...
Page 141: ...Service Mode COPYRIGHT 2002 CANON INC 2000 CANON BOOKLET TRIMMER A1 REV 0 FEB 2002 ...
