COPYRIGHT© 2002 CANON INC.
2000
CANON BOOKLET TRIMMER-A1 REV.0 FEB. 2002
CHAPTER 2 BASIC OPERATIONS
2-7
When the pusher plate has moved back and thus the delivery path is opened (and the press
and the stopper are released) to form a delivery path, the booklet is moved forward once
again.
When the booklet leaves the vertical feeding roller, the holder plate moves down when the
pusher plate moves forward.
When the pusher plate reaches advance position and the pusher plate and the delivery tray
keep the booklet in position, the holder plate moves up as far as its upper limit.
[1] Pusher plate
[2] Stacked booklets
[3] Delivery tray
[4] Holder plate
F02-101-07
REF.
Through Mode (Trim OFF)
The stopper is released as soon as the feeding motor goes ON; when the
booklet is detected at the entrance to the feeding assembly, the pusher plate
moves back as far as the position to open the delivery path.
Thereafter, the operation is the same as in trim mode. In through mode,
pressing or trimming do not take place so that the booklet will not be
stopped at all.
[1]
[2]
[3]
[4]
Summary of Contents for Two-Knife Booklet Trimmer-A1
Page 129: ...COPYRIGHT 2002 CANON INC 2000 CANON BOOKLET TRIMMER A1 REV 0 FEB 2002 CHAPTER 6 APPENDIX ...
Page 132: ...User Mode COPYRIGHT 2002 CANON INC 2000 CANON BOOKLET TRIMMER A1 REV 0 FEB 2002 ...
Page 141: ...Service Mode COPYRIGHT 2002 CANON INC 2000 CANON BOOKLET TRIMMER A1 REV 0 FEB 2002 ...
