varioPRINT 135 Customer Expectations Document
Version 13
varioPRINT 135 Customer Expectations Document
Page 29
Main Unit Table Continued
Item
Specifications
Ozone Emissions
None
Altitude
3,280.8’ (less than 1,000 m) maximum
Temperature while in
Use
62.6°F to 78.8°F (17°C to 26°C) for print speeds greater than 120 ipm, or
62.6°F to 82.4°F (17°C to 28°C) for print speeds up to 120 ipm
Humidity
20 to 80% RH
6.2 PRISMAsync Controller
Item
Specifications
Server Type
•
T30 Embedded controller with optional removable hard disk
•
Web-based configuration with Settings Editor
Processor
Celeron G1620 at 2.7 GHz, 2 Cores
Memory
4 GB
Hard Disk
500 GB
Network Connectivity
10Base-T/100Base-TX/1000 Base-T
Network Protocols
TCP/IP (LPR/LPD, Socket), SMB Static IP/Auto IP (via DHCP)
SNMP v1-v3 (Printer MIB, Private MIB, Job Monitor MIB), IPP
Operating System
Windows 10
Page Description
Languages
Adobe PostScript 3, PPML/GA,
Error! Bookmark not defined.
Level 1 (optional),
PPML, V1.5/2.1/2.2 (optional), PDF 1.7, PDF/VT, PCL 6, XPS, IPDS
(optional)
Print from USB
PDF, PS, PCL, XPS via USB connection on the operator panel
Security
CC EAL 2+, E-Shredding, HTTPS, Firewall, PIN for Doc Box, User
authentication to SDS, optional removable hard disk, IPv6, software
protection license (integrity checker), user authentication per user role (key
operator, system administrator, and service representative)
Features
•
Print-while-RIP
•
RIP-then-Print
•
Streaming
•
Web-based configuration
•
Remote diagnostics
•
Remote monitor
•
Process multiple jobs
•
No cycle-down between jobs
•
Multi-tasking (scan, copy, print)
•
Remote meter reading
•
Remote software upgrade
Options
•
Generic USB mouse support
•
Section 508 kit (Mouse-C1)
•
CCD (Charge-Coupled Device) interface for accounting
•
Operator attention light
•
Removable hard disk
19 If a customer wants to upgrade their PRISMAsync R3.5 (TM1 or TM2) controller to R5.2, they must purchase a
new T30 PRISMAsync controller.