varioPRINT 135 Customer Expectations Document
Version 13
varioPRINT 135 Customer Expectations Document
Page 45
6.16 Two-Knife Booklet Trimmer-A1
Item
Specifications
Description
Upper knife, reciprocating top-bottom trimmer
Maximum Number of
Sheets
Up to 100 sheets (20 lb bond (80 g/m
2
))
Up to 98 sheets (20 lb bond (80 g/m
2
)) + 2 sheets (110 lb cover (300 g/m
2
))
Acceptable Paper Sizes
13” x 19.2”, 12” x 18”, 12 5/8” x 17 3/4”, 11” x 17”, LGL, LTRR
Acceptable Paper
Weights
Weight: Plain:
13 lb bond to 110 lb cover (50 to 300 g/m
2
)
Coated: 24 lb bond to 90 lb cover (80 to 240 g/m
2
)
Trimming Width
Top-bottom
: 0.08” to 0.59” (2 mm to 15 mm)
Trim Box Capacity
Up to 1,500 sheets of trimmed strips
(width 0.59” (15 mm), LTRR paper (20 lb bond (80 g/m
2
))
(Equivalent to approximately 750 sheets)
Conveyor Capacity
Up to 30 booklets
(40 sheets of an LTRR booklet (20 lb bond (80 g/m
2
), with the width trimmed
0.79” (20 mm) by the Booklet Trimmer)
Power Source/Maximum
Power Consumption
120 to 127 V AC, 50/60 Hz, 4.5 A
Approximately 440 W
Dimensions (H x W x D)
Approximately 41” x 21 1/8” x 30 3/8” (1,040 mm x 536 mm x 770 mm)
(without conveyor and delivery trays)
Weight
Approximately 319 lb (145 kg) (without conveyor and delivery trays)
36 If the cover sheet is thinner than the other sheets in the booklet, the cover sheet may not be output as expected.
We recommend that a thicker sheet be used for the cover sheet.
37 Minimum width of booklet in top and bottom directions: 7.48” (190 mm)
38 The Two-Knife Booklet Trimmer-A1 does not come with a conveyor tray. It can only be used with the optional
Booklet Trimmer-D1’s conveyor tray. Therefore, the conveyor capacity is the same as the booklet trimmer’s
conveyor tray.