varioPRINT 135 Customer Expectations Document
Version 13
varioPRINT 135 Customer Expectations Document
Page 66
16. Media Usage/Compatibility
The Canon varioPRINT 135
maintains reliable, predictable, and high-quality output.
Consistency of the output is dependent on knowing and compensating for the
variables of a print job. The Canon varioPRINT 135
incorporates many control
systems which compensate for environmental and print process conditions.
Another variable is the print media. Knowing the characteristics of the media
facilitates optimal print output.
16.1 Media Characteristics by Media Library Parameters
This section describes the standard media library characteristics and parameters.
The following settings can be manually adjusted through the Settings Editor >
Media > Add icon. The Settings Editor can only be accessed via a Web browser
using the IP address of the Canon varioPRINT 135.
The IP address of the Canon varioPRINT 135 is found on the machine’s operator
panel through System > Local key operator settings > Connectivity > TCP/IP
address.
The table below describes the Add new media settings and each setting’s
description.
Setting
Description
Name
Set the name of the media.
Type
Set the brand name of the paper.
Size
Select the size of the paper from the drop-down list, including
custom size paper.
Width (0.01 inches)
Specify the width of the custom paper in millimeters or inches.
Length (0.01 inches)
Specify the length of the custom paper in millimeters or inches.
Tab sheet
Select the check box to use tab paper, and then enter the cycle
length (how many tabs in one set).
Insert
Select the check box to use the paper as a sheet insertion, and
then enter the cycle length (how many sheet insertions in a set).
Oriented
Specify the portrait or landscape orientation of the paper.
Cycle length
Set the value 1 to N. Where “N” is the number of sheets in one
cycle. Must specify the cycle length when specifying tab sheets
or sheet insertions.
Punch count
Specify how many holes are in the pre-punched paper.
Weight (lb Bond/lb Index)
Specify the weight of the paper in g/m
2
or lb.
Color
Specify the color of the paper. This setting acts as an identifier to
display the color of the paper on the operator panel.
RGB Color
Specify the RGB color value (0-255) for identification purposes
on the operator panel.
Surface type
Specify the type of paper (e.g., Vellum, Coated, Textured).