1-10
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
DNS
(1) [Name Server Address 1], [Name Server Address 2]
Enter each name server address you want to register. If only one address is registered,
keep the [
Name Server Address 2
] field blank.
(2) [Host Name Registration with DDNS]
Select [
Enable
] and enter the host name. The host name can be registered in the name
server.
You can use up to 63 (single-byte) characters including A to Z, a to z, 0 to 9, "-" (hyphen),
"_" (underber) and "." (period).
SNMP
(1) [SNMP]
Select whether to use SNMP from [
Disable
] or [
Enable
]. When [
Enable
] is selected, the SNMP
Manager can reference information set in the camera.
(2) [Community Name]
Set a community name for SNMP. It is recommended that you change the default community
name to ensure security of the system.
(3) [Administrator Contact Information]
Set contact information (e-mail address, etc.) for the Administrator of the camera. The set
details can be referenced by the SNMP Manager.
Tip
z
For added convenience, register the host name if the camera is use by [
Auto (DHCP)
]
(
P. 1-8). Certain items must be set beforehand for registration in the DNS server. For
the DNS server settings, contact your System Administrator.
z
If [
Name Server Address 1
] cannot be used, [
Name Server Address 2
] will be accessed.
However, [
Name Server Address 2
] must be already set.
COP
Y
