1-27
Setting HTTP/FTP Upload and E-mail Notification (Upload)
1
1
D
etailed Settings
(6) [Authentication]
Select [
None
], [
POP before SMTP
] or [
SMTP-AUTH
] as the e-mail authentication mode.
Set an appropriate mode according to the authentication mode used by the SMTP server to
send to.
[User Name], [Password], [POP Server]
If [
POP before SMTP
] is selected as the e-mail authentication mode, enter the user name,
password, and host name or IP address of the POP server, required for authentication.
[User Name], [Password]
If [
SMTP-AUTH
] is selected as the e-mail authentication method, enter the user name and
password required for authentication.
(7) [Subject]
Enter the subject of the e-mail to be sent (using up to 31 characters).
(8) [Message Body]
Enter the message (text) of the e-mail to be sent (using up to 255 characters). The test can be
entered by parameters having "%" characters (
(9) [E-mail Notification Test]
Clicking the [
Exec
] button initiates an e-mail notification test based on the settings currently
applied.
COP
Y
