1-34
Setting the Image Buffer, Motion Detection, Audio Playback and Interval Timer (Event)
(7) [Audio Playback at ON Event]
Select the audio playback operation to be performed upon an ON event. If [
Enable
] is
selected, the sound specified under [
Sound Clip
] will be played when the mode changes to
[
Detected
] (ON event).
(8) [Audio Playback at OFF Event]
Select the audio playback operation to be performed upon an OFF event. If [
Enable
] is
selected, the sound specified under [
Sound Clip
] will be played when the mode changes to
[
Detected
] (OFF event).
(9) [Sound Clip]
Select the audio to be played. For registration of sound clip, see "Sound Clip Upload"
(
(10)
[Volume
]
Select the volume of sound clip using an integer of 1 to 100. The greater the value, the larger
the volume becomes.
External Device Input
(1) [External Device Input Event]
Select whether to [
Enable
] or [
Disable
] external device input events.
Note
z
The motion detection function cannot be interlocked with external device output. However,
interlocking is possible if the optional recording software VK-64/VK-16 is used.
z
For precautions on motion detection, see "Notes on Use of Motion Detection, Streaming
and Bundled Recording Software VK-Lite" (
Start Guide
).
COP
Y
