1-46
Setting the Items Requiring Rebooting (Reboot Item)
Note
These settings relate to network connection. If any setting is changed to a value that may
disable camera connection from the active browser, the following dialog box is displayed to
alert the user.
To apply the new setting, click [
OK
].
Depending on the new setting, it may not be possible to connect to the camera again after
rebooting. In this case, a candidate URI is displayed as shown below,
if available, to facilitate reconnection to the camera.
If you want to connect to the camera again, try using the displayed URI.
If the camera cannot be connected using the displayed URI, contact your System
Administrator.
* In the [
Reboot Item
] menu, the [
IP Address Setting
], [
IP Address
], [
Subnet Mask
],
[
Default Gateway Address
], and [
HTTP Port
] settings relate to network connection.
COP
Y
