background image

2-11

Setting Up

You must install software to display images from the camera and to manage the camera. There

are 3 types of software you can install.

• VB Administration Tools: Software for managing the camera (

 P.4-2).

• Viewer for PC: Software for displaying images from the camera (

 P.2-12).

• VBCollector: Software that allows you to collect pictures and audio recorded* by the camera

on a PC and view the recorded images and play back the audio data* on the PC (

 P.6-11).

When using older versions of VBCollector, please refer to page 6-12.
*

 Only available with two particular models (

 P.iii)

1. Check that all other applications are closed, insert the CD-ROM included with

the camera into the CD-ROM drive of your PC and follow the steps below.

1

Double-click [My Computer] on the desktop.

If you are using Windows XP, click the [Start] button and then [My Computer].

2

Double-click the CD-ROM icon displayed and then double-click the [VBTools] folder.

3

Double-click [VBToolsInstall.exe] to start the installation.

2. Once the starting screen has

appeared, select the installation
method.

Easy Installation:

VB Administration Tools
and Viewer for PC are
automatically installed.
The basic software
required is installed
easily.

Custom Installation: Select whether you

want to install the VB
Administration Tools,
the Viewer for PC or the
VBCollector.

3. Follow the instructions on the screen to install the software.

5. Install the Software

○ ○ ○ ○ ○ ○ ○ ○

Installation is now complete.

 002-VBC50i-E-US

06.7.6, 11:33 AM

11

CO

PY

Summary of Contents for VB-C50i/VB-C50iR





















































































































































































































































Reviews: