background image

Network Camera

/

Installation Guide

YT1-1603-000

Thank you for purchasing Canon Network Camera VB-M600D/VB-M600VE (hereafter referred to as 
the camera).
VB-M600D is designed for indoor use only. VB-M600VE can be installed underneath eaves.
Be sure to read “Installation Guide” (this document) and “VB-M700F/VB-M600D/VB-M600VE 
Operation Guide” (included in the Setup CD-ROM) before use.
This “Installation Guide” explains the mounting method of the camera on a ceiling or wall and 
the mounting method using the optional junction box mounting kit PS600-VB. Be sure to read the 
“Safety Precautions” section for correct use. After reading this “Installation Guide”, keep it in a 
readily accessible location for future reference. 
For the installation of this camera recessed into a ceiling or wall using the recessed mounting kit 
(optional), please read the “Recessed Mounting Kit SR600-VB Installation Guide” bundled with 
the recessed mounting kit. 
When using the heater unit (optional), please read the “Heater Unit HU600-VB User's Manual” 
bundled with the heater unit.
The detailed procedures for using this camera are explained in the “VB-M700F/VB-M600D/
VB-M600VE Operation Guide”. Read these guides carefully before using the camera to ensure 
correct use.

*  For the latest information (fi rmware and bundled software, User's Manuals, operating 

environment, etc.) please check our website.

Caution

   Request a professional installer for all camera installation work. 

Never try to install the camera by yourself. Doing so may result in 
unforeseen accidents such as dropping the camera or electric shock.

Check Bundled Items

This product comes with the following items. If any item is missing, contact the dealer where you 
purchased the product. 

1.

 

Camera main unit 

 (VB-M600D 

or 

VB-M600VE)

2.

 

Power connector

3.

 

Safety wire

 

4.

 

Audio interface cable

 

5.

 

Template

for VB-M600VE

for VB-M600D

6.  Dome case lock screw wrench
 (VB-M600VE 

only)

 

7. Setup 

CD-ROM

9. Warranty 

card

8.  Installation Guide (This document)

10. Notice

European Union (and EEA) only.

These symbols indicate that this product is not to be disposed of with your 
household waste, according to the WEEE Directive (2002/96/EC), the Battery 
Directive (2006/66/EC) and/or your national laws implementing those Directives.

If a chemical symbol is printed beneath the symbol shown above, in 
accordance with the Battery Directive, this indicates that a heavy metal 

(Hg = Mercury, Cd = Cadmium, Pb = Lead) is present in this battery or accumulator at a 
concentration above an applicable threshold specifi ed in the Battery Directive. 

This product should be handed over to a designated collection point, e.g., on an authorized one-for-
one basis when you buy a new similar product or to an authorized collection site for recycling waste 
electrical and electronic equipment (EEE) and batteries and accumulators. Improper handling of this 
type of waste could have a possible impact on the environment and human health due to potentially 
hazardous substances that are generally associated with EEE.

Your cooperation in the correct disposal of this product will contribute to the effective usage of 
natural resources.

For more information about the recycling of this product, please contact your local city offi ce, waste 
authority, approved scheme or your household waste disposal service or visit 
www.canon-europe.com/environment.

(EEA: Norway, Iceland and Liechtenstein)

User's Manuals

 VB-M600D/VB-M600VE Installation Guide (This document)

This guide provides notes on camera installation and explains the procedures to install the 
camera onto a ceiling or wall.

 VB-M700F/VB-M600D/VB-M600VE Operation Guide (Included in the Setup CD-ROM)

This document explains the initial camera settings, Admin Tools settings, viewer operations 
and troubleshooting, etc. 

Options

Options can be bought separately as necessary.

Recessed Mounting Kit SR600-VB

This dedicated optional item is used to install the camera recessed into a wall or ceiling.

Junction Box Mounting Kit PS600-VB

This dedicated optional item is used to mount the camera to a junction box.

Heater unit HU600-VB

This dedicated optional item is attached to the interior of VB-M600VE to maintain operation 
temperature within the dome and achieve stable operation even in extremely cold environments.

AC Adapter PA-V17

A dedicated AC adapter for this camera.

Symbols Indicating Safety Precautions

This "Installation Guide" uses the following marks to indicate important information the 
user should know in order to use the product safely. Be sure to observe these items. 

 

Warning

Inappropriate handling against the instruction accompanied 
by this sign may result in death or serious injury. Be sure to 
observe these warnings to ensure safety.

 

Caution

Inappropriate handling against the instruction accompanied 
by this sign may result in injury. Be sure to observe these 
precautions to ensure safety. 

Caution

Inappropriate handling against the instruction accompanied by 
this sign may result in property damage. Be sure to observe these 
precautions. 

 

Important

This symbol indicates important or restricted items. Be sure to 
read this section. 

 

Note

Contains reference information for operation or additional 
explanations. 

Safety Precautions

This section explains precautions that must be observed when using the camera. If they 
are not observed, injury, death and/or property damage may occur. Read the following 
information carefully and be sure to observe the precautions.

Installation Precautions

 

Warning

Do not install in the following places:

 

 Places in strong direct sunlight, near heat-generating objects, or subject to high 

temperatures 

 Places near fi re sources or fl ammable solvents (alcohol, thinner, etc.) 
 Humid or dusty places 
 Places subject to lamp black or steam 
 Places subject to sea air 
 Confi ned or enclosed places

Fire or electric shock may result.





Write the serial number and MAC address of the camera (printed on the seal at the bottom of 
the camera) in the fi eld below before storing this Installation Guide in a safe location.

  Serial No.

 _________________________________

  MAC Address

 _________________________________

© CANON INC. 2011 

Printed in Taiwan

ENGLISH

Main Specifi cations

Camera

Image Sensor 

1/3 type CMOS (primary color fi lter)

Number of Effective Pixels 

Approx. 1.3 million pixels

Scanning Method 

Progressive

Lens 

3x Optical Zoom Lens (Electric Drive)

Focal Length 

f = 2.8 mm (W) – 8.4 mm (T)

F-number 

F1.2 (W) – F2.0 (T)

Viewing Angle 

Horizontal: 101.2° (W) – 33.7° (T)
Vertical: 74.7° (W) – 25.3° (T)

Day/Night Switch 

Auto or Manual. In “Auto” mode, it switches automatically according to “Switching 
Brightness” and “Response” settings.

Min. Subject Illumination
      Day Mode (color):  

0.25 lux (F1.2, Shutter Speed 1/30 sec., when Smart Shade Control is off)
0.07 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Control is off)

 

0.018 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Control is on)

      Night Mode (monochrome):  0.008 lux (F1.2, Shutter Speed 1/30 sec., when Smart Shade Control is off) 

0.002 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Control is off) 
0.001 lux (F1.2, Shutter Speed 1/8 sec., when Smart Shade Control is on)

Focus 

One-shot AF/Manual/Fixed at infi nity

Shooting Distance (from front of lens)
 

Day Mode: 0.3 m (12 in.) – 

Night Mode: 1.0 m (3.3 ft.) – 

Shutter Speed 

1, 1/2, 1/4, 1/8, 1/15, 1/30, 1/60, 1/100, 1/120, 1/250, 1/500, 1/1000, 1/2000, 
1/4000, 1/8000 sec.

Exposure 

Auto/Flickerless/Shutter-Priority AE/Manual (Shutter Speed/Aperture/Gain)

White Balance 

Auto/Light Source (Warm Fluorescent, White Fluorescent, Daylight Fluorescent, 
Mercury Lamp, Sodium Lamp, Halogen Lamp)/Lock (One-shot WB)/Manual

Metering Mode 

3 Options (Center-weighted/Average/Spot)

Exposure Compensation 

7 levels

Smart Shade Control 

7 levels (function for increasing the brightness of shaded subjects in a high-
contrast image)

Pan Angle Range 

350° (±175°)

Tilt Angle Range 

150° (±75°)

Rotation Angle Range 

350° (±175°)

Moving Speed* 

Pan: 19.2°/sec., Tilt: 14.2°/sec.
Rotation: 43.7 °/sec.

 

*When the Camera Angle Setting Tool is used

Server

Video Compression Method 

H.264, JPEG

Image Size 

JPEG: 160 x 120/320 x 240/640 x 480/1280 x 960
H.264: 320 x 240/640 x 480/1280 x 960

Image Quality 

JPEG/H.264: 5 levels

Frame Rate*1 

JPEG: 30 – 0.1 fps
H.264: 30/15/10 fps

Max. Frame Rate 

Max. 30 fps (1280 x 960) *1

Simultaneous Client Access 

JPEG: Max. 30 C 1 Admin Client
H.264: Max. 10 Clients

Audio Compression Method 

G.711 µ-law (64 kbps)

Audio Communication Method 

Full-duplex (two-way) – Echo cancellation function compliant

Audio Playback 

available *2

Protocol IPv4: 

 

TCP/IP, UDP, HTTP, FTP, SNMP (MIB2), SMTP (Client), DHCP (Client), DNS 
(Client), ARP, ICMP, POP3, NTP, SMTP authentication, WV-HTTP (from 
Canon), ONVIF

 IPv6: 

 

TCP/IP, UDP, HTTP, FTP, SMTP (Client), DNS (Client), ICMPv6, POP3, NTP, 
SMTP authentication, WV-HTTP (from Canon), ONVIF

On-Screen Display 

available

Encrypted Communications 

SSL/TLS, IPsec (Auto Key Exchange/Manual)

Camera Control 

3 user levels available (Administrator/Authorized user/Guest user)
Up to 50 users' user names and passwords can be set for Authorized users.

Privacy Mask 

Number of registration: Max. 8 places, Number of mask colors: 1 (select from 9 
colors)

Access Control 

Access control (user name and password)/Host-based access control (IPv4, IPv6)

Intelligent Function 

<Image>
      Detection Types: Moving Object Detection, Abandoned Object Detection, 

Removed Object Detection, Camera Tampering Detection
Detection Areas: Max. 15 places

 <Volume>

     Volume Detection

Event Trigger Type 

External Device Input 1/2, Intelligent Function (Image), Intelligent Function 
(Volume), Timer

Image Upload 

FTP/HTTP/SMTP (e-mail)
Temporary storage memory in camera: Max. approx. 4MB, Frame Rate: Max. 10 fps

Event Notifi cation 

HTTP/SMTP (e-mail)

Language English/French/German/Italian/Spanish/Japanese

*1  The frame rate may be reduced due to Viewer PC's specs, the number of clients accessing at the same 

time, network loads, type or movement of the subject, image quality setting or other reasons.

*2  A separately-sold amplifi er speaker is necessary for playing audio fi les.

“ONVIF” is a trademark of ONVIF Inc.

Interface

Network Terminal 

LAN x 1 (RJ45, 100Base-TX (Auto/full-duplex/half-duplex))

Audio Input Terminal 

Φ 

3.5 mm (

Φ 

0.14 in.) mini-jack connector (monaural)

(common for LINE IN & MIC IN)    

∗ 

connect via a bundled audio interface cable

 

LINE IN/MIC IN can be switched in the setting page
LINE IN x 1 (connect to an amplifi er microphone) or
MIC IN x 1 (connect to a microphone w/o amplifi er)

Audio Output Terminal 

Φ 

3.5 mm (

Φ 

0.14 in.) mini-jack connector (monaural)

(LINE OUT) 

  

∗ 

connect via a bundled audio interface cable

 

LINE OUT x 1 (connect to an amplifi er speaker)

External device I/O Terminal 

Input x 2   Output x 2

Memory Card 

SD Memory Card, SDHC Memory Card Compatible. Max. approx. 32 GB, 
Frame Rate: Max. 1 fps

External Dimensions

VB-M600D

VB-M600VE

Junction Box Plate (Optional)

83.5 (3 9/32)

4.2 (0.17)

83.5 (3 9/32)

85.7 (3 3/8)

46.0

(1 13/16)

83.5 (3 9/32)

85.7 (3 3/8)

46.0

(1 13/16)

Junction box mounting holes

Φ 

4.5 (

Φ

 0.18)

Notes on Privacy and Publicity Rights Regarding the Use of Video/Audio

When using the camera (for video or audio recording), it is the full responsibility of the user to 
protect privacy and avoid any violation of publicity rights. Canon shall have no liability whatsoever 
in this regard. 
Reference

 If identifi able structures or premises will be captured, be sure to gain approval of the building 

management offi ce before installing the camera.

Legal Notice

In some cases, camera monitoring may be prohibited by law or regulation, the details of which 
differ by country or region. Before using the camera, check the laws or regulations of the country 
or region where the camera is used. 

 

Caution

For installation or inspection of this camera, consult the dealer where you purchased 
the product.

 

 This installation should be made by a qualifi ed service person and should conform to 

all local codes.

 When installing on a ceiling, make sure the surface is capable of withstanding the total 

weight of the camera and ceiling plates and is suffi ciently reinforced if necessary.

 Periodically check the brackets and screws for rust and loose material to prevent 

injuries and equipment damage due to falling items. 

 Do not install in unstable places, places subject to signifi cant vibration or impact, or 

places subject to salt damage or corrosive gas.

 Be sure to attach the safety wire when installing the camera.

Failure to do so may result in the camera falling or other accidents.

 Do not touch the edge of metal parts with bare hands.
 Do not insert your fi nger in the space between the brackets and the ceiling.

Injury may result.


Caution

 Do not install the camera on an unstable surface.
 To maximize shock resistant specifi cations, do not install on insuffi ciently strong 

surfaces or surfaces subject to signifi cant vibration (VB-M600VE).

Malfunction may result.


 Take care not to damage wiring or pipes in the room.

Damage to peripheral items may result.

Precautions for Mounting the Camera Underneath Eaves (VB-M600VE)

For installation of VB-M600VE underneath eaves, observe the following precautions to retain 
waterproof/dustproof capabilities.

Position the 
wiring hole 
straight down

 Be sure to install the camera underneath eaves unexposed to 

direct sunlight.

 Install the camera in a place unexposed to direct rainfall.
 Firmly fi x the dome case to the main unit of the camera with the 

lock screws, taking care not to pinch cables between the main 
unit and dome case.

 If wiring the camera through the wiring hole on the bottom, use 

silicone sealant or a rubber mat to ensure waterproofi ng. Also 
use an insect repellent sponge if necessary.

 If wiring with a composite pipe (NPT 3/4 inch threaded hole) 

attached to the wiring hole, wrap tefl on tape around the tip of the 
pipe, clear any debris from the wiring hole and fi rmly tighten the 
pipe. Apply silicone sealant after attaching the pipe.

 When mounting the camera onto a wall or other upright surface, position the wiring hole 

straight down to prevent rain infi ltration. 

Precautions for Use

 

Warning

 If you discover defective conditions such as smoke, strange sounds, heat or strange 

odors, immediately stop using the camera and contact your closest dealer.

Continued use may cause fi re or electric shock.

 

 Do not disassemble or modify the camera. 
 Do not damage the connecting cable and others. 
 Do not spill water or other liquid inside the camera, spray the camera with water, or 

otherwise make it wet. 

 Do not insert foreign objects into the camera. 
 Do not use fl ammable sprays near the camera. 
 Do not leave LAN cables, external power supplies or AC adapter (optional) power 

connectors connected when the camera is not in use for long periods.

 Do not use fl ammable solvents such as alcohol, paint thinner or benzine when cleaning 

the camera.

Fire or electric shock may result.





Notes on Power Supply

 

Warning

 Only use the dedicated AC adapter PA-V17 (optional) for AC power.
 Do not set any heavy objects on the power cable.
 Do not pull, forcibly bend, scratch, or modify the power cable. 
 Do not cover or wrap the AC adapter (optional) with cloth or blankets.

Fire or electric shock may result. 

Be sure to read the User's Manual for the PA-V17 (optional) before use.




Caution

 After turning off the power, wait for at least fi ve seconds before turning the power on 

again. If the power is turned on again too quickly, the camera may operate poorly.


Others

Operating Environment 

VB-M600D

  Temperature: -10 – 50°C (14 – 122°F) / Humidity: 5 – 85% (without condensation)

 

VB-M600VE

 Temperature: -10 – 50°C (14 – 122°F) / Humidity: 5 – 85% (without condensation)

Temperature: -30 – 50°C (-22 – 122°F) / Humidity: 5 – 85% (without condensation)*
  *equipped with an optional Heater Unit HU600-VB

Power Supply 

PoE:  PoE power supply via a LAN connector (IEEE802.3af compliant)

 

AC adapter: Optional PA-V17 (AC 100-240 V)

 

External power source: AC 24 V/DC 12 V

Power Consumption   

PoE Input: Max. approx. 8.6 W

 

 

When using AC adapter PA-V17: Max. approx. 10.9 W

 

 

DC Input:  Max. approx. 9.0 W

 

 

AC Input:   Max. approx. 8.3 W

 

VB-M600VE

  

Max. approx. 18.9 W*   *equipped with an optional Heater Unit HU600-VB 

Dimensions 

VB-M600D

  (

Φ

 x H) 

Φ

 186 x 140 mm (

Φ 

7.32 x 5.51 in.)

 

VB-M600VE

 (

Φ

 x H) 

Φ

 180 x 147 mm (

Φ 

7.09 x 5.79 in.)

Weight 

VB-M600D

  Approx. 1200 g (2.65 lb.) (camera main unit only)

 

VB-M600VE

 Approx. 1910 g (4.22 lb.) (camera main unit only)

Impact Resistance 

VB-M600VE

 External materials: aluminum alloy, Dome: polycarbonate plastics 

Lens shock absorbing mechanism
Estimated shock resistant: 50J (impact strength) *Based on Canon's test method

Dust-resistant/ 

VB-M600VE

IP66-rated

Waterproof Specifi cation 

  * Only when installed correctly and proper dust and waterproofi ng are performed

AC Adapter (optional)

Model PA-V17
Input 

100-240 VAC 50/60 Hz

Output 

13 VDC 1.8 A (MAX), temperature -10°C – 35°C (14 – 95°F) humidity 20 – 85% 
(without condensation) 
When combined with the network camera
13 VDC 1.0 A (MAX), temperature -10°C – 45°C (14 – 113°F) humidity 20 – 85% 
(without condensation)

Polarity 

Black line side (-), white line side (+)

Dimensions 

(W x D x H) 58 x 118 x 25 mm (2.28 x 4.65 x 0.98 in.) (excluding projections)

Weight 

Approx. 215 g (7.6 oz.) (excluding cables)

Junction Box Mounting Kit (Optional)

Model  

PS600-VB

Network camera-mounting environments
 

VB-M600D

  Temperature: -10 – 50°C (14 – 122°F) / Humidity: 5 – 85% (without condensation)

 

VB-M600VE

  Temperature: -10 – 50°C (14 – 122°F) / Humidity: 5 – 85% (without condensation)

 

 

Temperature: -30 – 50°C (-22 – 122°F) / Humidity: 5 – 85% (without condensation)*
  *equipped with an optional Heater Unit HU600-VB 

Weight 

VB-M600D

  Approx. 159 g (5.7 oz.) (including camera fi xing screws)

 

VB-M600VE

  Approx. 162 g (5.8 oz.) (including camera fi xing screws)

3/4” NPT threaded hole

Radius of ceiling 
mounting holes 
placement

Φ 

158 (

Φ 

6.22)

Radius of ceiling 
mounting holes 
placement

Φ 

155 (

Φ 

6.10)

61.5

(2.42)

78.5

(3.09)

   123 (  4.84)

   186 (  7.32)

140 (5.51)

   123 (  4.84)

   180 (  7.09)

61.5

(2.42)

85.5

(3.37)

147 (5.79)

Unit: mm (in.)

WARNING

 

VB-M600D

   To reduce a risk of fi re or electric shock, do not expose 

this product to rain or moisture.

VBM600IG̲E.indd   1

VBM600IG̲E.indd   1

2011/06/17   13:59:24

2011/06/17   13:59:24

Reviews: