Canon VBCollector, User Manual

c

Note

VBCollector cannot be installed on a PC where MV Ver. 2.0 or later, optional

software sold separately, has already been installed.

To Install...

If any other applications are running, please exit

them before installation. Please also be sure to

close the Windows Service Panel.

Double-click “CltSetup.exe” on the CD-ROM to start

up the installer. Click Next.

2

If you agree to the clauses in the licensing

agreement, click Yes.

1

Installing VBCollector

4

Operating Environment and Installation

Operating Environment

Windows 2000 (SP4 or later)/Windows XP (SP1a or later)

Microsoft Internet Explorer 6.0 (SP1 or later)

Operating System

Web Browser

20GB HDD or greater (NTFS formatted)

Hard Disk

* If you configure your system to record pictures per second with servers and perform the maximum of 16 tasks (

→

 P.11) 

at the same time, it is recommended that you use a desktop PC with Pentium 4  2.2 GHz and 512MB RAM or greater.

* It is recommended that you configure to collect up to 10,000 still pictures/day per a camera server. It the total 

amount of still pictures exceeds this value, it may take several minutes to display all the pictures.

• Network Camera VB-C50i/VB-C50iR

• Network Camera VB-C10/VB-C10R with Firmware Ver. 1.0 Rev. 25 or later

• Network Camera Server VB150 with Firmware Ver. 1.1 Rev. 30 or later

• Network Camera Server VB101 with Firmware Ver. 3.0 Rev. 68 or later

You should ensure the firmware version used is the latest one.

The latest firmware can be downloaded for free from the following WebView Product web page:

canon.com/webview

VBCollector Ver. 2.02

Supported Camera Servers