background image

Deleting Scenes and Stories

92

Deleting a Single Scene from a Story

1 Open the list of scenes of the story that contains the scene you want to delete.

[

b

 [

 Gallery] 

 Bring the desired story to the front 

 [Scene List]

2 In the [Scene List] screen, drag your finger up/down to select the scene you want to 

delete.

3 Touch the orange box on the right to open the [Edit Scene] screen.

4 Touch  [

d

] and then touch [Yes]. 

• The selected scene is deleted.

5 Touch [OK] and then touch [

f

].

Deleting Scenes from a Story by Rating

1 Open the information screen of the story that contains the scenes you want to delete.

[

b

 [

 Gallery] 

 Bring the desired story to the front 

 [Story Details]

2 Open the rating selection screen.

[Edit Story] 

 [Delete]

3 Touch one or more of the rating buttons to select all the applicable scenes.

• A grayed out rating button indicates that no scenes in the story have been given that particular 

rating.

4 Delete all applicable scenes.

[Set]  

[Yes]

• Touch [Stop] to interrupt the operation while it is in progress. Some scenes may be deleted 

nevertheless.

5 Touch [OK] and then touch [

f

].

Deleting Stories

Deleting a story permanently deletes all the scenes it contains. The two preexisting stories, [Unsorted] 
and [Video Snapshot], cannot be deleted.

1 Open the gallery.

[

b

 [

 Gallery]

2 Select the story you want to delete.

• Drag your finger right/left to bring the desired story to the front.

3 Open the [Delete Story] screen.

[Story Details] 

 [Edit Story] 

 [Delete Story]

4 Touch [Yes].

• Touch [Stop] to interrupt the operation while it is in progress. Some scenes may be deleted 

nevertheless.

5 Touch  [OK].

Summary of Contents for VIXIA HF G10

























































































































































































Reviews: