132
Wi-Fi Functions
• E-mail addresses must consist of single-byte characters. Only e-mail
addresses with 16 or fewer characters before the @ mark can be set in
the camcorder.
Wireless Playback on a Computer
Using the Media Server function, you can wirelessly view your movies
and photos on your computer or similar device. You will need an
access point connected to your home network and software installed
on your computer that can play back movies and photos from a media
server. We recommend that you connect the computer to the access
point using a LAN cable. Refer also to the instruction manuals for the
computer, software and access point.
Operating modes:
1 Camcorder: From any index screen, activate the media server
function.
• If you have previously configured and saved a connection to an
access point, the camcorder will connect automatically to the last
access point used.
• If no connections to access points have been saved in the
camcorder, the message [Save the access point] will appear on the
screen. Touch [OK] to configure and save a new access point
connection (step 2 in
Wi-Fi Connection Using an Access Point
(
A
133)) before continuing with this procedure.
Access point
LAN cable
Computer
SCN
0
>
[
—
Wi-Fi]
>
[
8
Media Server]
>
[OK]
COP
Y
